Jeep Patriot Side Mirror Holes

Jeep Patriot Mirror Drain Holes

The side mirrors have a nice hole inside of the housing that leads down into the arm that holds the mirror.  Jeep did try to mold a drain hole into the bottom lip where it mounts against the body.  They then put a nice foam rubber pad in between this and the body effectively sealing their own drain hole.  While surfing one of the various Jeep form’s out there I saw a post about drilling a hole in the bottom of the mirror to drain the water out. 

Jeep Patriot Side Mirrors

I took the first mirror apart to see how it looked inside but drilled the second mirror while it was on the vehicle.

Tools Needed:
Drill
3/16” Drill bit

Here is a picture of the nice hole in the bottom of the mirror. This is where the water goes to fill up the arm. Jeep did include a molded in drain hole at the very base of the mirror where it bolts to the body. They also put a piece of rubber to protect the paint on the door that effectively seals this drain hole.

Drill a 3/16” hole in the bottom of the mirror right before the hinge starts.  I lined the hole up with where the molded plastic comes together. You can be a little off. The water will still flow out.  By drilling the hole here you will not get the water spots down the side of your doors. I will see if this size hole clogs up with anything and possibly go up a little on the drill bit size.

gurujoe

We're here to help you find the best deal, no matter where it is as well as reviews.